VICKERS DG4V-5-2C-M-U-C6-20

Vickers Hydraulic Solenoid Valve NG10 D05 24V DC

Description

The Vickers DG4V-5-2C-M-U-C6-20 is a high-performance, solenoid-operated directional control valve. As part of the globally recognized DG4V-5 series, now under the Eaton brand, it provides reliable control over the start, stop, and direction of fluid flow in hydraulic systems. This valve is designed for subplate or manifold mounting according to the ISO 4401-05 (NG10 / D05) standard, ensuring interchangeability and ease of installation.

Specifications

• Manufacturer: Vickers (Eaton)
• Model: DG4V-5-2C-M-U-C6-20
• Type: Directional Control Valve
• Size: NG10 / CETOP 5 / NFPA D05
• Actuation: Dual Solenoid
• Spool Configuration: 4-Way, 3-Position, Spring-Centered
• Spool Type (Center Position): 2C – All ports blocked
• Coil Voltage: 24V DC
• Electrical Connection: DIN 43650
• Manual Override: Yes, booted type
• Max Operating Pressure: 315 bar (4500 psi)

Label Info

• Model: DG4V 5 2C M U C6 20
• SOL A / SOL B: Indicates dual solenoid operation
• Company: VICKERS, A TRINOVA COMPANY

Application

This directional valve is suitable for a wide range of industrial hydraulic applications, including machine tools, presses, material handling equipment, and injection molding machines where precise control of actuators is required.

Country of Origin

Made in England.

CO2 Impact

Choosing this pre-owned valve saves approximately 45 kg of CO2 emissions compared to a new one, contributing to a more sustainable industrial practice.

Availability

This item is a used, tested component in good working condition. It may show signs of cosmetic wear but is functionally sound. Order now from spareparts2day for expert support and fast delivery.

FAQ

What is the maximum operating pressure and flow rate for the DG4V-5 series?

The Vickers DG4V-5 series valves are typically rated for a maximum operating pressure of 315 bar (4500 psi) on the P, A, and B ports, and 160 bar (2300 psi) on the T port. The nominal flow rate is around 120 liters per minute (32 GPM), though this can vary depending on the spool type and fluid viscosity.

How can I verify the function of the solenoids and the manual override?

The solenoids can be tested by applying the correct voltage (24V DC for the C6 coil) and listening for a distinct “click” as the armature shifts the spool. The manual override, located at the end of the solenoid housing, can be pushed with a non-sharp tool to manually shift the valve spool. This is useful for diagnostics and system setup without electrical power.

What type of hydraulic fluid is recommended for this valve, and what are the filtration requirements?

These valves are designed to work with standard mineral oil-based hydraulic fluids (HL, HLP). For optimal performance and longevity, it is crucial to maintain fluid cleanliness according to ISO 4406 code 20/18/15 or better. Poor filtration is a leading cause of premature valve failure.

Last Update: Friday, March 13, 2026

spareparts2day is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners.