SCHNEIDER ELECTRIC GV2ME10

Schneider Electric TeSys GV2ME10 Motor Circuit Breaker

Description

The Schneider Electric GV2ME10 is a thermal-magnetic motor circuit breaker from the renowned TeSys range. It provides essential protection for three-phase motors against short-circuits, overloads, and phase failures. With an adjustable thermal trip setting from 4 to 6.3 Amperes, it offers flexible protection for a variety of small motor applications. Its compact design allows for easy installation on a DIN rail within control cabinets.

Specifications

• Manufacturer: Schneider Electric
• Part Number: GV2ME10
• Product Range: TeSys GV2
• Type: Thermal-Magnetic Motor Circuit Breaker
• Poles: 3-Pole
• Current Setting Range: 4 to 6.3 A
• Rated Voltage: 690V AC
• Control Type: Rocker Switch (Start/Stop)
• Terminals: Screw Clamp

Label Info

• Model: GV2ME10
• Thermal Range (Ie): 4-6.3A
• Rated Impulse Voltage (Uimp): 6kV
• Standards: IEC/EN 60947-2, IEC/EN 60947-4-1

Application

This MPCB is commonly used in industrial automation to protect small electric motors in applications such as conveyor belts, pumps, fans, and mixers. It is suitable for direct-on-line (DOL) starting of motors.

Country of Origin

Made in France.

CO2 Impact

By purchasing this pre-owned item, you are helping to avoid the emission of approximately 10.4 kg of CO2, which is comparable to driving a car for 52 km. This represents a significant contribution to environmental sustainability.

Availability

This item is in stock and ready for immediate dispatch. Order now from spareparts2day for expert support and fast delivery.

FAQ

What is the function of the ‘TEST’ button on the GV2ME10?

The ‘TEST’ function allows for a mechanical check of the tripping mechanism without applying an electrical fault. It helps ensure the breaker is functioning correctly before commissioning.

Can this GV2ME10 breaker be used for single-phase motor protection?

Yes, it is possible. For single-phase applications, all three poles of the breaker must be wired in series to ensure the thermal protection element works correctly and balances the load.

What is the correct tightening torque for the screw clamp terminals?

According to the manufacturer’s specifications printed on the side, the recommended tightening torque is 1.7 N.m (Newton-meters), which corresponds to approximately 15 lb.in.

Last Update: Friday, March 13, 2026

spareparts2day is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners.