TELEMECANIQUE CA2-EN122

Telemecanique CA2-EN 122 Control Relay

Description

The Telemecanique CA2-EN 122 is a robust and reliable control relay designed for industrial automation and control panel applications. With a 4-pole configuration featuring two normally open (NO) and two normally closed (NC) contacts, it is suitable for a wide range of logic and switching tasks. Manufactured in France, this relay is built to high standards including IEC, VDE, and BS for dependable performance.

Specifications

• Manufacturer: Telemecanique (Schneider Electric)
• Model: CA2-EN 122
• Contact Configuration: 2 NO + 2 NC
• Thermal Current (Ith): 6 A
• Rated Insulation Voltage (Ui): 660 V
• Utilization Category (AC-11): 6 A at 500 V
• Poles: 4-Pole
• Mounting: DIN Rail or Screw Mount

Label Info

• Standards: IEC 337-1, VDE 0660, BS 5424, NF C 45250
• Approvals: UL Listed 170M, CSA, KEMA KEUR

Application

Ideal for use in motor control circuits, logic interlocks, signaling systems, and general purpose switching in industrial machinery and electrical cabinets.

Country of Origin

Made in France.

CO2 Impact

By choosing this pre-owned component, you are actively participating in the circular economy and have helped avoid approximately 8.0 kg of CO2 emissions associated with the production of a new part. This saving is comparable to the emissions from a 40 km car journey.

Availability

This is an obsolete item, but it is in stock and ready for immediate dispatch. Order now from spareparts2day for expert support and fast delivery.

FAQ

Question?
What is the coil voltage for this specific CA2-EN 122 relay?

Answer:
The coil voltage is not explicitly marked on the visible labels of this unit. The ‘122’ in the model number defines the contact arrangement (2NO/2NC), but not the coil voltage. You must verify the required voltage for your application and ensure compatibility, as this series was available with various AC and DC coil options (e.g., 24V, 48V, 110V, 230V).

Question?
Is this relay compatible with modern TeSys accessories?

Answer:
No, the Telemecanique CA2 series is an older, obsolete line. Accessories like auxiliary contact blocks, timers, or surge suppressors are not cross-compatible with the modern Schneider Electric TeSys D or TeSys K series. You must source original CA2-E series accessories if needed.

Question?
What are the mounting options for this relay?

Answer:
This control relay is designed for two primary mounting methods. It can be snapped directly onto a standard 35mm DIN rail or it can be screw-mounted to a panel using the two mounting holes integrated into its base.

spareparts2day is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners.

Current Date: Friday, March 13, 2026