SKF TS60

SKF TS 60 V-Ring Seal for 60mm Shafts

Description

The SKF TS 60 is an all-rubber V-ring seal designed for rotating shafts. It serves as a reliable lip seal to protect bearing arrangements from contaminants and prevent lubricant leakage. Its simple design allows for easy installation and effective performance even with shaft misalignment or eccentricity.

Specifications

• Manufacturer: SKF
• Type: V-Ring Seal
• Model: TS 60
• Shaft Diameter: 60 mm
• Material: Nitrile Rubber (NBR)
• Profile: Standard (TS)

Label Info

• Designation: TS 60
• Barcode (EAN): 7316577106513

Application

This V-ring seal is suitable for a wide range of industrial applications, including electric motors, gearboxes, pumps, and agricultural machinery, where effective sealing against dust, dirt, and water splash is required.

Country of Origin

Made in Sweden.

CO2 Impact

By purchasing this pre-owned seal, you contribute to a circular economy and avoid approximately 0.8 kg of CO2 emissions associated with the production of a new one.

Availability

This item is in stock and ready for immediate dispatch. Order now from spareparts2day for expert support and fast delivery.

FAQ

Question?
What is the primary material of the SKF TS 60 and what are its temperature limits?
Answer:

The SKF TS 60 is made from Nitrile Butadiene Rubber (NBR). This material offers good resistance to mineral oils and greases and typically operates in a temperature range from -40 to +100 deg C (-40 to +212 deg F).

Question?
Can the TS 60 V-ring seal be used in high-speed applications?
Answer:

Yes, the standard TS profile V-ring is suitable for peripheral speeds up to 8 m/s. For speeds between 8 and 12 m/s, the seal must be axially located. For speeds exceeding 12 m/s, a metal support ring is recommended to prevent the seal from lifting off the shaft.

Question?
What is the correct installation procedure to ensure proper sealing?
Answer:

For proper function, the V-ring should be stretched and mounted on the shaft so it fits firmly. The sealing lip must press against the counterface (e.g., a bearing housing wall or a washer) with a specific calculated pressure. Ensure both the shaft and counterface are clean and free of burrs before installation.

spareparts2day is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners.

Friday, March 13, 2026