KSB ETANORM G 032-200 SF 01216137

KSB Etanorm Bare-Shaft Centrifugal Pump

Description

This is a KSB Etanorm G 032-200 SF, a single-stage volute casing pump designed for horizontal installation. The Etanorm series is a globally recognized standard for water pumps, known for its high efficiency and reliability. This bare-shaft pump allows for flexible motor pairing to meet specific application requirements. It is in excellent condition and ready for deployment.

Specifications

• Manufacturer: KSB
• Model: ETANORM G 032-200 SF
• Material Number: 01216137
• Flow Rate (Q): 10.00 m3/h
• Delivery Head (H): 10.00 m
• Nominal Speed (n): 1395 RPM
• Year of Manufacture: 2010

Label Info

• Order No.: 9971686988 000300 01
• Max Viscosity (v): 20 mm2/s
• ZN: 3823-217

Application

Ideal for water supply, cooling water systems, fire-fighting systems, irrigation, drainage, and heating/air-conditioning systems. Suitable for handling clean or slightly contaminated water without abrasive solids.

Country of Origin

Made in Germany.

CO2 Impact

Opting for this pre-owned pump instead of a new one prevents the emission of approximately 110 kg of CO2, which is comparable to the emissions from a 550 km car journey.

Availability

This item is in stock and available for immediate dispatch. Order now from spareparts2day for expert support and fast delivery.

FAQ

What type of mechanical seal is required for this KSB Etanorm G 032-200 SF pump?

The required mechanical seal depends on the application, specifically the fluid type, temperature, and pressure. You should consult the KSB technical documentation for the Etanorm series and select a seal with compatible materials (e.g., carbon/ceramic, SiC/SiC) and design for your specific operating conditions.

Can this pump be run at a different speed than the 1395 RPM listed on the plate?

Yes, this pump can be operated at different speeds using a variable frequency drive (VFD). However, changing the speed will alter the pump’s performance curve (flow rate and head) according to the pump affinity laws. Ensure the new operating point is within the pump’s recommended efficiency range to avoid cavitation or damage.

What is the material of construction for this pump?

The “G” in the model name ETANORM G typically indicates a standard construction with a volute casing made of EN-GJL-250 (grey cast iron). The impeller and other wetted parts may vary, but are commonly cast iron or bronze. For definitive material specifications, refer to the material number 01216137 in the manufacturer’s documentation.

Last Update: Friday, March 13, 2026

spareparts2day is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners.